Clutch Test Bench
Driveline & Transmission Testing
Information and quotation request
Just mention the product code in your request. Sharing specimen details and the test specification speeds things up.
About the system
The clutch test bench tests the performance and durability of dry friction clutches with electric inertia simulation. Thermal load, friction torque and lining wear are measured; clutches up to 3000 Nm rated torque and 1500 r/min are tested with ±0.2% FS control accuracy.
Technical scope
- ≤560 kW drive
- ≤10 000 Nm
- Inertia 5.25–18 kg·m²
Test functions and capabilities
- Thermal load test
- Friction torque characteristics
- Lining wear
- Electric inertia simulation
- Performance and durability
Configurations and technical data
| Configuration | Technical values |
|---|---|
| Drive | ≤560 kW |
| Load | 250 kW / 1500 r/min |
| Input torque | ≤10 000 Nm |
| Inertia | 5.25–18 kg·m² |
| Specimen | Rated torque ≤3000 Nm; ≤1500 r/min |
| Control accuracy | ±0.2% FS |
Values show the range of available configurations. Final technical values are defined by the project specification.
Project scope
- Joint definition of the technical specification
- Configuration and layout proposal
- Installation, commissioning and acceptance tests
- Operator training and after-sales technical support
Other systems in this group
Driveline Static Torsion Test Bench
0–150 kNm static (200 kNm+ on request) · Quasi-static ±10 kNm at 2.5–60 r/min
Drive Axle & Transmission Fatigue Bench
150–900 kW · Input up to 32 000 Nm, output up to 80 000 Nm
Axle Housing Bending Fatigue Bench
60 t vertical · 25 t lateral/brake
Torque Converter Test Bench
Drive 250–660 kW · 0–7000 r/min
Driveline Backlash & Impact Test Bench
±50 Nm to ±10 kNm · ±720°
Driveline Sealing & Lubrication Test Bench
Up to 20 000 r/min · Roll ±45° / pitch ±60°