Vehicle Tilt Table
Vehicle Safety & Body Strength
Information and quotation request
Just mention the product code in your request. Sharing specimen details and the test specification speeds things up.
About the system
The vehicle tilt table tilts the vehicle laterally in a controlled way to determine the static rollover angle and the 3D coordinates of the centre of gravity. Weighing plates on the platform measure wheel and axle loads. It is configured from a 6 m passenger car table up to 11 m and synchronised 2×11 m (22 m) commercial vehicle/bus tables, and a bus rollover and superstructure strength version is also available.
Technical scope
- 6 / 10 / 11 / 20 / 22 m tables
- 5–80 t
- Up to 50°
- 3D centre of gravity
- Bus rollover & superstructure strength
Test functions and capabilities
- Static rollover angle
- 3D centre of gravity (CoG) measurement
- Wheel and axle loads
- Bus rollover and superstructure strength
- Controlled lifting and lowering rates
Configurations and technical data
| Configuration | Technical values |
|---|---|
| Passenger car 6 m | 5 t; 45°; ±0.2°; 16 shear-beam load cells |
| Commercial vehicle 11 m | 40 t; 45°; ±0.2°; CoG repeatability ±1%; 20 weighing plates |
| Commercial vehicle 22 m (2×11 m synchronised) | 60 t; 45°; lifting 2–10°/min, lowering 5–20°/min |
| Heavy static rollover | Weighing 0–80 t; 0–50°; length 5–20 m; width 2.5 / 3.2 m |
| Coach rollover bench | 500 kN; 0–50°; table 10 × 3 m |
Values show the range of available configurations. Final technical values are defined by the project specification.
Project scope
- Joint definition of the technical specification
- Configuration and layout proposal
- Installation, commissioning and acceptance tests
- Operator training and after-sales technical support
Other systems in this group
Commercial Cab Pendulum Impact Bench
0–80 kJ · 500–7200 mm
Bumper Pendulum Impact Bench
800–3400 kg · 1–16 km/h
Drop-Weight Impact Bench
Up to 10 m · 20 000 J
Roof Crush & Cab Static Strength Bench
30–200 kN · Side door 80 kN
Front/Rear Underrun Protection Bench
200 kN · 450 mm
Pedestrian Protection Test System
10–60 km/h · 3500 J